News:

Check out the newsletters posted at our main club site:  http://57fordsforever.com

Main Menu

Upper corner L/H SS rear window trim 57 ranchero

Started by JRWASH, 2012-02-17 20:44

Previous topic - Next topic

JRWASH

A friend of mine is looking for a Upper corner L/H SS rear window trim  for his 57 ranchero if anybody has one they could spare please send me a E-mail or post a reply and I'll have him contact you, Thanks JR
1957 Fairlane 500 63A  Starmist Blue & Colonial white was originally a 312 A/T 4bbl dual exhaust car, Engine & Trans long gone and dropping in a 390/C6 combination.

Frankenstein57

That's actually not a stainless piece. The entire bed perimeter molding is stainless except for the top corners, they need to be chromed. Mark

Partsman

Both chrome and stainless were used I think it depends on where the vehicle was assembled.  I have both stainless and chrome the chrome is usually rust and of course stainless is not.

JRWASH

The L/H side was chromed and rotted away and the R/H side is Stainless, That's the case with his car anyway.  Hopefully someone can scrounge one up for him.  Thanks
1957 Fairlane 500 63A  Starmist Blue & Colonial white was originally a 312 A/T 4bbl dual exhaust car, Engine & Trans long gone and dropping in a 390/C6 combination.

Ford Blue blood

and I have a left bed side and the rear corner that are steel!  It was a TX car, very early in the production run as it has the 56 and earlier style vin tag on the door jam.  No sign that it was ever chromed, still has some paint on the un rusted portions.
Certfied Ford nut, Bill
2016 F150 XLT Sport
2016 Focus (wife's car)
2008 Shelby GT500
57 Ranchero
36 Chevy 351C/FMX/8"/M II

RICH MUISE

#5
Same thing we ran into last year talking about wing window frames....I had made a statement saying the wingwidow was stainless as was the hinge and lock handle plate, then somebody logged on to say their's was steel and had to be replated. I think we all agreed at that time it was an option for the suppliers as what was used....I'm thankful that most of the bright parts seem to be stainless.
I can do this, I can do this, I, well, maybe

Frankenstein57

You learn something new about these cars all the time. I was told these pieces were all steel, I have several sets, all steel. Are the stainless ones rare or fairly common?  Mark

Ford Blue blood

Given they were the same for 7s, 8s and 9s I would say the stainlees is fairly common.  I have never seen stainless upper corners but have heard they exist.  Have a nice re-chromed set of upper corners but would like to find a set of stainless.
Certfied Ford nut, Bill
2016 F150 XLT Sport
2016 Focus (wife's car)
2008 Shelby GT500
57 Ranchero
36 Chevy 351C/FMX/8"/M II

wildhog

The cheap ranchero's had painted bed trim, the others have stainless bed mouldings, with chrome top corners, I have a N.O.S. top corner that is stainless. I was told by a old guy that Ford in detroit, that they had trouble with the top corners cracking in the press when they were made out of stainless, and this is why they changed to chrome steel pieces. Who knows-but you sure don't see many of the stainless pieces.
JUST A MIDNIGHT CRUISE DOWN THUNDER ROAD (TOM DRUMMOND MIDWEST DIRECTOR)

57chero

Both the upper corners on my 57 are stainless, a lot of people think there chrome because after I buffed them they shine like chrome. As far as the pieces being the same they are for the 57 and 58 rancheros but the long side pieces and the rear corners and tailgate cap are different on a 59.