Rear Spring Anti-Squeak Pads

[Bubba]

Bros:
Does anyone know of a source for 57 63A, rear spring Anti -Squeak pads?
I've seen a couple of listings for 58 pads but no listings for 57's
Are the 57 and 58 pads the same?
Thanks
BuBBA

[4banger]

I like to know how you detected a squeek from your springs. The squeek may be comming from the crossmember that your shocks are attached to. The tube sits in a round pocket at the frame rail. The welds could have let go. As the leaf spring works and the shock goes up or down, the tube pivots to cause the sqeek. Just curious !!!!!!!

[RICH MUISE]

www.classicautoparts.com    page 60 of their 49-72 online pdf catalog. they also have poly liner. They show 49-58 being the same, with 57's needing 12 pads

[Bubba]

4Banger:
I didn't detect a squeak.
I am getting ready to bolt in a new set of springs in the 63A and was looking for a source for anti squeak pads.  The factory shop manual and the factory parts illustration differ in the location of the pads and the number.  But I could be reading one of them wrong will go back and check tonight.
BuBBa

[Ford Blue blood]

Those pads really soften the ride by eliminating the friction between leafs.  As the spring compresses and rebounds the leafs actually slide over each other.  The pads allow a small space between the ends and soften the "bump", they don't change the spring rate or ride height.  It is more noticable on lighter cars and the 57 falls into that catagory.