Swift Sure brake

[Ecode70D]

    I'm installing the  factory Swift Sure Power brake unit in my car.  Would someone with that unit please take a picture of his firewall for me so I can see exactly what hole is  used for the vacuum hose.   I would like to do it correctly the first time.  Thanks in advance.   Jay

[RICH MUISE]

Can't answer your question, but I'm wondering where you came up with that silly concept of doing it right the first time? That's just not how things are done, Jay.

[Ecode70D]

Yeah Rich
    That is silly isn't it?   
     FWIW  That is a 1958 Ford illustration of the unit because my 1957 Ford shop manual does not have a better/complete one.
     So I have to go to the experts who know for sure which way to run that hose..   Jay

[hiball3985]

If and when I see the one local Fairlane again I'll see if he has power brakes. I know the other two 57's in the area don't.

Where E-codes available with power brakes? Does the 2x4 manifold have a vacuum port?

[SkylinerRon]

When i can dig thru the the snow i'll check for you.

Ron.

[Ecode70D]

When i can dig thru the the snow i'll check for you.

Ron.

Ron
  Thank you very much.  I certainly will look forward to that but don't do too much snow digging if you can help it.
   Jay   

[dgasman]

Here is a pic of were  the hose goes thru the firewall on my 58 ranchero with factory installed sure swift PB . The hose is in the hole next to the wire bulk head hole. Hope this helps

[Ecode70D]

Dgasman
    Thank you very much.
    That's perfect now I can punch that particular plug out..   It looks like you have a dual master cylinder like I do.  Is there any improvement with the Swift Sure system?   Jay   

[junior58]

Here it is on my 57.

[Ecode70D]

Here it is on my 57.

   Steve
   Thank you very much for the picture.  Now it is very clear where the hole location is.  Jay