What Dual Master cyl will Fit

[hotrodbob]

What dual master cyl will bolt up to the stock 4 bolts on the firewall? We are switching to discs using the stock spindles

[RAWms]

IF you are thinking discs front and drum rears non-power, I think I once ran an early 70s Maverick MC in a sedan delivery.  The front discs/spindles were '74 Mercury Montego & calipers.   It has been a few years now but that is what I remember.   Good luck, r

[fomocochoptop]

 I remember using 1967-72 mustang or Cougar Disc/Drum Master Cylinder. Make sure you use the Correct Proportioning Block also. it will bolt to 2 of the four bolt holes.

[Frankenstein57]

I bought a nice new one on ebay, bolts right up 195$ Has a small booster for clearance. I don't recall the company, but he is on there all the time. I'm nowhere near using it yet. Mark

[shopratwoody]

I took a factory plate off a firewall at the junkyard that changed it to the Mustang bolt pattern.Some mid 70 Ford product.
later, Ron

[JPotter57]

I run `74-`77 Maverick master cyls, for manual disks.  The part is readily available at NAPA.  The main reason I like it, besides that it works really well, is that the lines exit on the left side, instead of toward the engine.

[BAMA_57]

Sorry to dig up an old post but... What do you do for the brake light switch?
Ron

[Fairlane500Ron]

Hello
I used a 1965 Mustang electric switch but had to use the push rod
that came with my 74 Mavrick Mstr cyl  p/n wagner R83746. it has a flat end to make the switch operate.  The original 57 ford brake push rod was round on the end and will not work
I'll try to find the p/n.  got it at a parts store.  less than $5
Works like a charm.
Use one of the top empty bolt holes to run the wires through the firewall.
If I could find the "Old" posts, the sw p/n is there
I'll try to post a pic of it mounted.
Ron

[57 Ford Kustom]

I used a 76 Granada Master cyl. It came with the flat end push rod (had to be lenghten 1/2") $16.00 at Auto Zone no core. Also used the Mustang stop lite switch as Ron has in previous post. You are not going to find a master cyl that has the 4 bolt mount. You use the bottom 2 holes to mount the master cyl .


TOM

[shopratwoody]

There is a plate that adapts the two hole to the four on the firewall. I took one off a Ford at the junkyard.
I used a tri 5 Chev stop light sw. It's an adjustable push button that the brake pedal arm hits. Made a small
bracket for it and welded it. Also used the Mustang type MC with lines going away from engine.
Ron

[BAMA_57]

Okay, thanks guys. I just happen to have a MC left over from a Mustang project that was never used with the rod on it.
Ron