News:

Check out the newsletters posted at our main club site:  http://57fordsforever.com

Main Menu

lower ball joints

Started by 57 imposter, 2016-04-07 13:26

Previous topic - Next topic
Print
Go Down Pages1
User actions

57 imposter

2016-04-07 13:26
Does anyone know the tapper of the lower ball joint stud?

canadian_ranchero

#1
2016-04-07 18:20
1.5 inch per foot.look at my engine swap post reply 106,it shows a picture of the reamer

57 imposter

#2
2016-04-07 20:41
Im a little confused, you are showing the tie rod end. Is the taper the same on the ball joint stud?

canadian_ranchero

#3
2016-04-07 22:32 Last Edit: 2016-04-07 22:34 by canadian_ranchero
yes, the reamer that i have is used for both

57 imposter

#4
2016-04-08 12:52
Thank You
Print
Go Up Pages1
User actions