News:

Check out the newsletters posted at our main club site:  http://57fordsforever.com

Main Menu

1957 Fairlane horn disassemble/ clean up

Started by chapingo17, 2016-12-04 10:36

Previous topic - Next topic

chapingo17

Has anyone tried to disassemble hi\lo pic horns? I bought 2 but the low pitch is not coming on. I tried tapping but nothing seems to work. Has anyone try to open one of these and cleaning out internally?

Ford Blue blood

I did.  There are four tabs that hold the round cover on the horn.  Gently bend them out with a small pry bar (screw diver) and the cover will lift off.  Most likely problem is burned points in the electrical side.  I used 600 paper to "file" the burnt part off the points.  All is well.
Certfied Ford nut, Bill
2016 F150 XLT Sport
2016 Focus (wife's car)
2008 Shelby GT500
57 Ranchero
36 Chevy 351C/FMX/8"/M II

Lgcustom

I have done the same thing with good results.

chapingo17

I tried to file down the points on the horn but horn did not work. I found out that the problem was at the points they were not even touching. I tried to bend points plate together but I was not able to. I proceeded to drill out points rivets to clean & adjust points. I was able to make the horn work. Replaced rivets with screws.