Turn signals

[clubcoupe57]

I had my stock steering wheel restored so I took my custom wheel off which hs been on for about 10 years , so I installed my stock wheel on looks great but it doesn't cancel my blinkers , I must be missing something, any ideas thanks .

[abe_lugo]

Two things to check.
Make sure the turn signal switch bolts or screws are tight.

The make sure your wheel is centered and cam the rear cancel cam or C shaped bushing that hits the signals.

There also a spring on the cam that can break 

[abe_lugo]

Some pics of what to expect
The two little numbs on the switch is what get a canceled when the wheels turns and the silver C chapped bushing hits it.
Also note the position on the C shape vs the spokes. You can see the position on the horn ring to compare.  It seems to have turned my photo

This is a wheel I got years back I have hanging on the wall.
Also not this switch is bad some of the wire were brittle and broke loose at the connection.

   

[clubcoupe57]

Thanks Guys my wheel is missing   the cancel part, doesn't look like it ever had one,

[clubcoupe57]

Does anyone know where I can get the c bushing to cancel the turn signals

[abe_lugo]

There is loose one on ebay
https://www.ebay.com/itm/324373126872?hash=item4b86251ed8:g:H6QAAOSwU7lfrrA4

I think Dennis Carpenter might have them too.

[hiball3985]

Maybe the people who restored it took it off, did you contact them?

[clubcoupe57]

Thanks guys for all the info