rack and pinion systems

[RICH MUISE]

Thanks for the info. The obvious problem building a car from the ground up, like you and I, time lag between project completion and being able to actually check it out. I know I'm gonna have a list after it actually gets fired up. I just hope it only covers one side of a page.

[Wirenut]

Gasman, where did you get your tie rod adjustment sleeves? I orderd a set from speedway just like yours but they were 5/8". I needed 11/16 and they do not sell that size. I didn't measure properly before I ordered. If you can share the supplier I would appreciate it.

[gasman826]

Mine came from Speedway.  Sleeves and hiems joints (inner tie rod) are not typically available in 11/16" thread.  I changed my outer tie rod ends to Moog number ES351 which have the same spindle attachment as '57 out tie rod ends and 5/8" threads.  By using ES351 end, all components can have common parts with 5/8" thread.